Publications
B.Y. Stevinson, D.L. Bourell, J.J. Beaman, Jr., "Freeform Fabrication of Non-Metallic Objects by Selective Laser Sintering and Infiltration", Materials Science Forum, 561-565, 2007, pp. 817-820.
D.L. Bourell, J.J. Beaman and N. Hopkinson, "Part 8: Research and Development", The Wohlers Report 2007, pp. 168-174.
K. C. Dickey, S. Subramanian, J. E. Anthony, L. H. Han, S.C. Chen, and Y.L. Loo, "Large-area patterning of a solution-processable organic semiconductor to reduce parasitic leakage and off currents in thin-film transistors", Applied Physics Letters, Vol. 90, 244103, 2007.
Uma Maheshwaraa, David Bourell, and Carolyn Conner Seepersad, "Design and Freeform Fabrication of Deployable Structures with Lattice Skins", Rapid Prototyping Journal, Vol. 13#4 (2007) pp. 213-225.
K.E. Ehmann, D. Bourell, M.L. Culpepper, T.J. Hodgson, T.R. Kurfess, M. Madou, K. Rajurkar, D. DeVor, "Micromanufacturing: International Assessment of Research and Development", Springer, Dordrecht, The Netherlands, 2007, 362 pages.
Faustini, M.F, Neptune, R.R., Crawford, R.H. and Stanhope, S.J. (2007). Manufacture of passive dynamic ankle-foot orthoses using selective laser sintering. IEEE Transactions on Biomedical Engineering (in press).
Rogers, W., Bosker, G., Crawford, R., Faustini, M., Neptune, R.R., Walden, J. and Gitter, A. (2007). Advanced transtibial socket fabrication using selective laser sintering. Prosthetics and Orthotics International 31(1): 88-100.
Rogers, B., Bosker, G.W., Faustini, M.F, Walden, G., Neptune, R.R. and Crawford, R.H. (2007). Variably compliant transtibial prosthetic socket fabricated using solid freeform fabrication – a case study. Journal of Prosthetics and Orthotics (in press).
B. Y. Stevinson, D. L. Bourell, J. J. Beaman Jr., "Support-Free
Infiltration of Selective Laser Sintered (SLS) Silicon Carbide
Preforms", Sixteenth Solid Freeform Fabrication Symposium, Bourell,
et al., eds, The University of Texas Mechanical Engineering
Department, August 2006, pp. 359-365.
Uma Maheshwaraa, Catherine Tradd, David Bourell, Carolyn Conner Seepersad, "Design and Freeform Fabrication of Deployable Structures with Lattice Skins" Sixteenth Solid Freeform Fabrication Symposium, Bourell, et al., eds, The University of Texas Mechanical Engineering Department, August 2006, pp. 598-611.
Ssuwei Chen, Jeremy Murphy, Jason Herlehy, David L. Bourell and Kristin L. Wood, "Development of SLS Fuel Cell Current Collectors", Rapid Prototyping Journal, 12#5, 2006, pp. 275-282.
B. Stevinson, D.L. Bourell, J.J. Beaman, Jr., "Dimensional Stability During Post-Processing of Selective Laser Sintered Ceramic Preforms", Virtual and Rapid Prototyping, 1#4, 2006, pp. 209-216.
B.Y. Stevinson, S-W. Chen, D.L. Bourell, J.J. Beaman, K.L. Wood, "Rapid Manufacturing by Pressureless Infiltration of Non-Metallic
Selective Laser Sintered Preforms" Proceedings of the First
International Conference on Rapid Manufacturing, Loughborough,
England, 2006, pp. 170-210.
Y. Lu, G. Mapili, G. Suhali, S.C. Chen, K. Roy, “A Digital Micro-mirror Device (DMD)-based System for the microfabrication of Complex, Spatially Patterned Tissue Engineering Scaffolds”, Journal of Biomedical Materials Research A, Vol. 77A (2), pp 396-405, 2006.
D. A. Fozdar, Y. Lu, D. B. Shao, and S. C. Chen, “Chapter 28:Nano/Micro-fabrication Techniques for Organic Electronics and Photonics”, book chapter in Handbook of Organic Electronics and Photonics(American Scientific Publishers),2006.
S.C. Chen, C. A. Aguilar, Y. Lu, “Rapid Prototyping”, book chapter in Encyclopedia of Biomaterials and Biomedical Engineering (Marcel Dekker), 2006.
Faustini, M., Neptune, R.R., Crawford, R., Rogers, W., and Bosker, G. (2006). An experimental and theoretical framework for manufacturing prosthetic sockets for transtibial amputees. IEEE Transactions on Neural Systems and Rehabilitation Engineering 14(3): 304-310.
Faustini, M., Neptune, R.R. and Crawford, R. (2006). Investigation of quasi-static response of compliant prosthetic sockets for transtibial amputees using finite elements method. Medical Engineering & Physics 28(2): 114-121
D.L. Bourell, R.S. Evans and S.L. Barrows, "High-Temperature Infiltration of Non-Metallic Articles Produced Via Selective Laser Sintering", Materials Science Forum, 475-479 2005, 2861-2866.
S. Chen, D. Bourell and K. Wood, "Fabrication of PEM Fuel Cell
Bipolar Plates by Selective Laser Sintering", 6th Global Innovations
Symposium on Materials Processing, T.R. Bieler, et al., eds., TMS,
Warrendale PA, 2005, pp. 51-58.
R. Scott Evans, David L. Bourell, Joseph J. Beaman, Matthew I. Campbell, "Rapid Manufacturing of Silicon Carbide Composites", Rapid Prototyping Journal, 11#1, 2005, pp. 37-40.
D.L. Bourell, "Guest Editorial", Rapid Prototyping Journal, 11#1, 2005, p. 3.
David Bourell, "Rapid Manufacturing Uses Infiltration Selective Laser Sintering", Time Compression Technologies, 10#5, (2005) 44-47.
R.S. Evans, D.L. Bourell, J.J. Beaman, M.I. Campbell, "SLS Materials
Development Method for Rapid Manufacturing", Sixteenth Solid
Freeform Fabrication Symposium, Bourell, et al., eds, The University
of Texas Mechanical Engineering Department, August 2005, pp. 184-196.
Ssuwei Chen, David L. Bourell, Kristin L. Wood, "Improvement of Electrical Conductivity of SLS PEM Fuel Cell Bipolar Plates", Sixteenth Solid Freeform Fabrication Symposium, Bourell, et al., eds, The University of Texas Mechanical Engineering Department, August 2005, pp. 458-467.
D.L. Bourell and J.J. Beaman, "Part 8: Research and Development", The Wohlers Report 2005, pp. 206-213. Bourell, J.J. Beaman and N. Hopkinson, "Part 8: Research and Development", The Wohlers Report 2005, pp. 216-225.
David Bourell and Kamlakar Rajurkar, "Materials", WTEC Panel Report on International Assessment of Research and Development in Micromanufacturing, WTEC, Inc., 2005, pp. 21-38.
G. Mapili, Y. Lu, S.C. Chen, K. Roy, “Laser-layered Micro-fabrication of Spatially Patterned, Functionalized Tissue Engineering Scaffolds”, Journal of Biomedical Materials Research B, Vol. 75B (2), pp. 414-424, 2005.
Y. Lu, C. A. Aguilar, and S.C. Chen, “Shaping Biodegradable Polymers as Nanostructures: Fabrication and Applications”, Drug Discovery Today, Vol. 2 (1), pp. 97-102, 2005.
C. A. Aguilar, Y. Lu, S. Mao, and S.C. Chen, “Micro-patterning of Biodegradable Polymers Using Ultraviolet and Femtosecond Lasers”, Biomaterials, Vol. 26 (36), pp. 7642-7649, 2005.
Faustini, M., Crawford, R., Neptune, R.R., Rogers, W.E. and Bosker, G. (2005). Design and analysis of orthogonally compliant features for local contact pressure relief in transtibial prostheses. Journal of Biomechanical Engineering 127(6): 946-951.